In-Ground Perimeter Outdoor Hoarding System

Interlocking panels made from 100% recycled PVC are used to make a fully re-usable, low-cost hoarding system.

• Height: 2500mm
• Width: 500mm
• Depth: 35mm
• Colours: White | Grey
• Versatile hoarding panels which clip securely to a scaffold frame
• Panels have integral clip rail on reverse side and snap together securely
• Hole depth determined by ground conditions 600mm/700mm/800mm
• Professional, durable finish, re-usable over many years
• Panels made from 100% recycled PVC, off-cuts are 100% recyclable - Zero Waste to Landfill.
• Will not warp, bow fade or splinter like plywood
• Easy to dismantle and re-use during multi-phase projects

Components

You will need the following components per linear metre of hoarding:

• 2 x 500mm x 2500mm PVC hoarding panels
• 4 x 9’ Scaffold Poles (vertical)
• 4 x plastic sleeves
• 8 x Fence or Gripper Couplers (to form double scaffold pole)
• 6 x Putlog Couplers
• 3 x 21’ (6m) Scaffold Poles (horizontal)

You will also require 6m (21') Scaffold Poles which run horizontally behind the hoarding at three heights. The hoarding panels are clipped securely to these poles.

For example, a standard 100m run of In-Ground hoarding requires:

• 50 x 21' (6m) Scaffold Poles
• 50 x Pressed Joint Pins
• 200 x PVC Panels
• 40 x 9' plus Scaffold Poles (vertical) Height determined by hole depth
• 800 x Fence or Gripper Couplers (to form double scaffold pole)
• 40 x Plastic Sleeves
• 60 x Putlog Couplers
• 600 x Panel Clamps

Vertical Pole spacings / intervals

The recommended distance between each double-scaffold vertical post is 2 metres.

It is crucial that your In-Ground hoarding complies with the relevant safety standards that apply to your site. We can supply you with standard recommendations or source and cost-up bespoke Wind Calculations on your behalf.

We have produced a step-by-step installation guide pdf to help you configure the hoarding. It is a simple, repeatable system. Call us on 01274 525 660 for expert advice.